Description

204-1005-007 30″ Steering Column Keyed and Tapered Input Shaft

 For use with all common Char Lynn, Sauer-Danfoss, and other aftermarket brand steering valves. If you have a 204-1005 with a different design code (the last 3 digits on the end of the part number) this will replace it as an assembly as long as the first seven numbers are the same.

Has the following dimensional specs:

• Tapered shaft w/3/16″ key, (Eaton DN style) with .790″ taper start diameter
• 3/4″-16 UNF thread
• Overall height 32.00″ not including shaft extension from bottom into steering valve
• Length from mounting tabs on base to top of outer tube jacket 29.78″
• Length of shaft extension 1.785″ from end of threads to top of outer tube jacket
• Base plate 3.27″ square, has bolt holes on 3.25″ bolt circle that will accept 3/8″ or M10 bolts
• Standard .800 O.D. 12 flat root splines for steering unit connection
• ACKSJ1DN2980000000000G