204-1017-007 18″ Steering Column w/Horn Wiring


This 18″ long column assembly has one horn contact wire lead and has been used on Clark forklifts as # 914677 and Yale forklifts as # 501180502.

Only 2 left in stock

SKU: 204-1017-007 Category:


204-1017-007 18″ Steering Column w/Horn Wiring

For use with all common Char Lynn, Sauer-Danfoss, MS Hydraulic, and other aftermarket steering valves.  If you have a 204-1017 with a different design code (the last 3 digits on the end of the part number) this will replace it as an assembly as long as the first seven numbers are the same.

Has the following dimensional specs:

  • 36 splines on top with 13/16-20 threads – see our matching nut.
  • Overall height 20.50″ not including shaft extension from bottom into steering valve
  • Length from mounting tabs on base to top of outer tube jacket 17.78″
  • Length of shaft extension 1.785″ from end of threads to top of outer tube jacket
  • Base plate 3.27″ square, has bolt holes on 3.25″ bolt circle that will accept 3/8″ or M10 bolts
  • Standard .800 O.D. 12 flat root splines for steering unit connection
  • with horn wiring, standard 1 wire