GS26080-95E-RCK 4.83 cu. in. Budget Steering Valve Kit

$305.00

The GS26080-95E-RCK is a 4.83 cu. in. hydraulic steering valve kit for off road applications and includes the steering control valve and adapter column, with retaining nut.

Only 2 left in stock

SKU: GS26080-95E-RCK Category:

Description

GS26080-95E-RCK

Save on this popular kit compared to buying the separate pieces!
The steering valve is a Midwest Steering unit and comes with our 1 year warranty against any defects in material or workmanship.  The column adapter is also brand new. The steering control unit has the following specs.

This non-load reaction unit (wheels stay pointed where you steer it, no return to center or reaction from loads at steered wheels) can be used with any cylinder type, but if you are using a balanced cylinder or two identical single ended cylinders you should look at the load reaction units also in our store.  We recommend as do all steering unit manufacturers that you use this style unit for sure if you have one single ended cylinder.

This size works well with many popular cylinders to give the normal 3-4 steering wheel turns lock-to-lock, but if you are unsure of the size you need let us know as we have numerous displacements available and can help you determine what is best for your needs, just call us with your cylinder dimensions (bore i.d., stroke being used, and rod o.d.) and we can help you with the calculation.  The unit has a rated flow requirement of 2.1 gpm, so a stock automotive style pump should have enough volume to run this pump in all operating conditions.

  • 4.83 cubic inch displacement (80cc)
  • 2.1 GPM minimum flow requirement @100 rpm.  6 GPM maximum
  • Open center oil flow
  • Bottom 9/16″-18 JIC Ports
  • Non-load reaction – suitable for use with all cylinder types
  • Manual steering check valve for emergency use
  • Includes 90 Bar/1305 psi Inlet / Pressure Relief valve

The column has 7/8″ OD with 36 splines and is 6-5/8″ tall from flange to end of shaft. Column is available seperately, see 15012.  Column mounting studs included as shown, along with retaining nut.

Please note–We cannot supply a mounting bracket.