Eaton 217-1056-002 Torque Generator 5.9 Cu.In., SAE ports

$1,251.00

217-1056-002 Torque Generator 5.9 Cu.In.,  9/16-18 O-Ring ports

Has a needle bearing on output shaft

Out of stock

SKU: 217-1056-002 Category:

Description

Eaton 217-1056-002

This 217-1056-002 torque generator is brand new

It replaces the 207-1056-001.

Very similar to the 217-1015-002, this unit has O-ring boss ports, so no port block kit is needed. Also has a needle bearing supporting the output shaft so if there is any side load to the shaft it can handle it. If you have a 217-1050-001 or 217-1050-002 you can also use this to replace it, as they are the same except those units do not have the needle bearings on the output shaft.

This unit has the following specifications:

  • 5.9 cu. inch displacement
  • 700 in. lbs. of torque output
  • 1000 psi maximum pressure handling
  • 3.5 gpm maximum required flow
  • 7/8″ OD shafts at each end with woodruff key slot and 5/16″ pinhole
  • 4.51″ between mounting faces
  • 9.13″ overall length including shafts
  • 3.39″ diameter
  • Two 9/16″-18 O-ring ports
  • Needle bearing on output shaft for high side load capability
  • Genuine Eaton Char Lynn

Buy from professionals who have specialized in steering for agricultural and industrial applications for over 25 years.  Free technical support, and we service what we sell from our central USA location, and all products are covered with one year warranty (Click here for more details).

Seal Kit for 217-1056-002 Click Here