204-1008-007 30″ Steering Column w/Horn Wiring

$328.50

This 30″ column with integral horn wire is a popular length and has been used on Clark forklifts as # 914681, Allis Chalmers forklift as #4914197, and Taylor as # 2536-350.

Only 1 left in stock

SKU: 204-1008-007 Category:

Description

204-1008-007 30″ Steering Column w/Horn Wiring

This column comes with integral horn wiring. For use with all common Char Lynn, Sauer-Danfoss, and other aftermarket brand steering valves. If you have a 204-1008 with a different design code (the last 3 digits on the end of the part number) this will replace it as an assembly as long as the first seven numbers are the same.

Has the following dimensional specs:

  • 36 splines on top with 13/16-20 threads – see our matching nut.
  • Overall height 32.00″ not including shaft extension from bottom into steering valve
  • Length from mounting tabs on base to top of outer tube jacket 29.78″
  • Length of shaft extension 1.785″ from end of threads to top of outer tube jacket
  • Base plate 3.27″ square, has bolt holes on 3.25″ bolt circle that will accept 3/8″ or M10 bolts
  • Standard .800 O.D. 12 flat root splines for steering unit connection