204-1011-007 25.5″ Steering Column w/Horn Wiring
$201.65
This column has a length of 25.5″ with integral horn wiring, and was used as # 538028 by Cat forklift and # 1043576M92 by Massey Ferguson tractor.
Out of stock
Description
204-1011-007 25.5″ Steering Column w/Horn Wiring
This column comes with integral horn wiring. For use with all common Char Lynn, Sauer-Danfoss, and other aftermarket brand steering valves. If you have a 204-1011 column with a different design code (the last 3 digits on the end of the part number) it will replace it as an assembly as long as the first seven numbers are the same.
Has the following dimensional specs:
- Has 7/8″ shaft w/ 36 splines and .859″ taper start diameter
- Threads 13/16″-20 UNF – see our matching nut.
- Overall height 27.68″ not including shaft extension from bottom into steering valve
- Length from mounting tabs on base to top of outer tube jacket 25.28″
- Length of shaft extension 1.785″ from end of threads to top of outer tube jacket
- Base plate 3.27″ square, has bolt holes on 3.25″ bolt circle that will accept 3/8″ or M10 bolts
- Standard .800 O.D. 12 flat root splines for steering unit connection
