204-1016-007 12″ Steering Column w/Horn Wiring


This 12″ column has two horn contact leads for use in electric vehicles needing isolated ground wire and has been used by Clark as # 914679.

Out of stock

SKU: 204-1016-007 Category:


204-1016-007 12″ Steering Column w/Horn Wiring

With Integral Horn wiring.  For use with all common Char Lynn, Sauer-Danfoss, and other aftermarket brand steering valves.  If you have a 204-1016 with a different design code (the last 3 digits on the end of the part number) this will replace it as an assembly as long as the first seven numbers are the same.

Has the following dimensional specs:

  • 36 splines on top with 13/16-20 threads – see our matching nut.
  • Overall height 14.187″ not including shaft extension from bottom into steering valve
  • Length from mounting tabs on base to top of outer tube jacket 11.76″
  • Length of shaft extension 1.785″ from end of threads to top of outer tube jacket
  • Base plate 3.27″ square, has bolt holes on 3.25″ bolt circle that will accept 3/8″ or M10 bolts
  • Standard .800 O.D. 12 flat root splines for steering unit connection
  • with horn wiring, standard 2 wire