204-1065-007 28″ Steering Column w/Horn Wiring

$179.08

This 28″ column assembly has one horn contact lead and a bracket attachment hole near the top, and has been used by Clark forklift as # 914678.

Only 1 left in stock

SKU: 204-1065-007 Category:

Description

204-1065-007 28″ Steering Column w/Horn Wiring

For use with all common Char Lynn, Sauer-Danfoss, MS Hydraulic, and Ognibene steering valves.   If you have a 204-1065 with a different design code (the last 3 digits on the end of the part number) this will replace it as an assembly as long as the first seven numbers are the same.

Has the following dimensional specs:

  • Has 7/8″ shaft w/ 36 splines and .859″ taper start diameter
  • 13/16″-20 UNF thread – see our matching nut.
  • Overall height 29.78″ not including shaft extension from bottom into steering valve
  • Length from mounting tabs on base to top of outer tube jacket 27.26″
  • Length of shaft extension 1.785″ from end of threads to top of outer tube jacket
  • Base plate 3.27″ square, has bolt holes on 3.25″ bolt circle that will accept 3/8″ or M10 bolts
  • Standard .800 O.D. 12 flat root splines for steering unit connection
  • One horn contact with wire lead
  • Has 3/16″ hole drilled in outer tube 1-3/8″ from top to accommodate bracket attachmennt